Mutiple sensor transmitter(CO2, Temp, Humi)
Designed for outdoor use or Industrial use
RS-485 communication ready
Suitable for agriculture
It can measure CO2, Temperature and Humidity.
It is having three high sensitivity sensors.
Analog Voltage and 4-20mA Current Output.
Alarm function for Air Status Warnings.
It has a compact waterproof box of size 120mmⅹ80mmⅹ55mm.
Air-Farm (Model: MC-S100) can measure the Air Status such as: CO2, Temperature and Humidity values.
This model has three sensitive sensors, which makes it an optimum choice for installation in Factories or Greenhouses.
This interface supports RS485 communication and two analog output types (i.e, Voltage and Current).
So, this model can be connected to other systems. Maximum 100 devices are possible to be connected on RS485 bus, Each of these device can have 0-5V, 4-20mA Output.
This model has Active Low Output (NPN driven Output) for the systems such as Relays, LEDs, etc, for CO2 quality warning.
Table 1. General Specifications
|Current Consumption||0.04||0.05||0.15||A||Test with Vin = 12V (Supply Voltage)|
Table 2. Sensors Specifications
|CO2 Measuring Range||0||-||10000||PPM|
|Accuracy (CO2)||-30||-||+30||PPM||Typically +/-5% (Above, 0 ℃)|
|-50||-||+50||PPM||Typically +/-7% (Below, 0 ℃)|
|Temperature Measuring Range||-10||-||50||℃|
|Humidity Measuring Range||0||-||80||%|
Table 3. Interface Specifications
|RS485 Recommended Request Time||500||1000||-||ms|
|Analog Output Range||0||-||5||V|
|4-20mA Current Output Range||4||-||20||mA|
|Response Time (for Analog and Current Output)||1.7||2||-||ms|
|Alarm 'On' State||-||2000||10000||PPM||Alarm will be triggered 'On' on these ppm levels.|